Garmin nuvi 360 updating bluetooth firmware Adult chat rooms basement
When plugged into the power cradle the unit remains powered but hangs-up and accepts no inputs after about 10 seconds. Corrected an issue where Cities search would not find cities whose names contain a diacritic 'S'. Despite these hardware differences, all above firmware downloads are exactly the same and can be used for any 7x0 unit. I'll also see how it works transferring favorites back and forth with Mapsource.Improved Fleet Management protocol support and corrected some Fleet Management-related issues. So I saw today that the Nuvi 7XX has a new firmware release. My guess (which will either be nearly confirmed or proven wrong) is that after a cold reset, 5.1 is stable and does offer improvements (as indicated in the Changelog posted near the top of this thread).But whether touching some screen buttons or not, about 10 seconds after the appearance of the standard "Warning" screen, my 750 shuts down. The nuvi is still recognizable as a drive when USBed to a computer, though. But be sure to have your Favorites backed up since they may be lost during the reset. Thanks, Mary For map updates, Garmin requires the most current firmware to be on the device.Until you hear this is fixed, be aware that we're now two for two on failures after updating to 5.10! I didn't lose my Favorites but it's better to be safe than sorry. Since 5.10 has been pulled due to problems Garmin has not checked for, this version will not be installed until it's re-released or another version is released to replace it (5.20 would be likely).I made the mistake of downloading it on to my Nuvi 760. While on the phone with a tech rep the line was disconnected. Never had a problem with a software download until this one. Since my nuvi 750 is a backup unit, I thought I'd give it a try. If true, the only issue was the 10-second turnoff after update until being reset.Now the unit just shuts-off about 10 seconds after turning on the unit. I immediately called back, and got a recording that Garmin's offices are now closed. The update seemed to go well with Web Updater completing the download in about 1 minute followed by the update of the unit complete with a scroll bar that took about 45 seconds to complete. Garmin may then have pulled 5.1 to avoid having to answer Customer Service questions and have to give reset instructions to everyone. I realize that this is a moot point for most folks since 5.1 is no longer available.If you have the link to an unlisted unit, please post it and I will add it to the list after being verified. I have two Nuvi 750's and two Lifetime Update cards.*Updated items 03/02/2011 added nuvi 24xx link *Updated items 02/21/2011 added nuvi 22xx & 23xx links *Updated items 12/01/2010 added nu Link! I updated the first one last Sunday and got version 4.90.
If I have missed a series or a unit within a series, please point it out and it will be added if available and I can locate it. If you already have this version, nothing will be installed.
Unfortunately, even if you perform master reset on Garmin GPS unit, it does not reset Garmin Lock security feature, which password-protect most Garmin electronic devices to deter theft.
If you forget the PIN or password unlock code to unlock the Garmin unit, the best solution is to bring it to Garmin to get unlocked.
Press “Yes” to reset (warning: all data will be erased and lost, so backup before proceeding) or enter maintenance mode. Press down on bottom right corner of the touchscreen, and then power on the GPS unit.
You should be prompted whether do you really want to erase all user data, or asked if do you really want to start up in maintenance mode.